86-573-87882805
Hongxiao Village, Yuanhua Town, Haining, Jiaxing, Zhejiang, China (Mainland)
Solar Energy Heat Pipe Solar Collector
JXSPC-Serial Premium Heat Pipe Solar Collector
Characteristic
1. Adopts red copper channel, with great performance of heat exchange.
2. Utilize copper heat pipes containing special medium liquid with low boiling point.
3. Work well in all climate, can be function well even in ambient temperature of minus 30 degree
Celsius.
4. Each heat pipe tube works independent and efficiently.
5. No water flows inside the vacuum tube, no risk of freezing.
6. Withstand high water pressure of up to 1.2 Mpa.
Material
1. Manifold: Aluminum alloy
2. Channel: Red copper
3. Heat pipe: Copper
4. Bracket: Aluminum alloy/ Galvanized steel/ Stainless steel
5. Insulation material: Rock wool
Premium Solar Collector Specification
Three-target Vacuum Tube Performance and Specification: | ||
Tube structure | All-glass double deck co-axial structure | |
Glass material | High borosilicate 3.3 glass | |
Outer tube diameter and glass thickness | Ø58±0.7mm; Glass thickness 1.6±0.15mm | |
Inner tube diameter and glass thickness | Ø47±0.7mm; Glass thickness 1.6±0.15mm | |
Tube dimension | 58*1800mm | |
Absorption | Coating material | CU/SS-ALN(H)/SS-ALN(L)/ALN |
Sediment method | Three Target magnetron sputtering plating | |
Absorptivity | α =0.92~0.96 (AM1.5) | |
Emission ratio | Emission: ε=0.04~0.06(80°C±5°C) | |
Vacuum degree | P≤5.0x10-3(PA) | |
Stagnation temperature (temperature inside of empty evacuated tubes) | 260~300 °C | |
Average heat loss | ULT 0.4~0.6 W/(m2 *°C) | |
Hail resistance | Ø25 mm | |
24mm Premium Heat Pipe Performance and Specification: | |
Heat pipe material | Oxygen free copper (TU1),Cu=Ag>99.99%(o2<16ppm) |
Condenser dimensions | Top: Ø24mm *65mm,Body: Ø8*0.6mm.length:1750± 10mm |
Heat-transfer-fins | 0.3mm/0.0098’’ thick sets of Aluminum fins,1630mm |
Starting speed | 30s |
Max. operation pressure | 6bar |
Max. testing pressure | 12bar |
Stagnation temperature | 236°C |
Manifold Performance and Specification: | |
Manifold header pipe | TU2 copper |
Manifold casing | Anodized aluminum alloy (6063-T5/T6) |
Insulation layer | Compressed rock wool. |
Bracket Performance and Specification: | |
Bracket | 2.0mm thickness aluminum alloy bracket. |
Vertical installation angle | Flat & pitched roof |
